RRETROPAPERDigital Archive of Vintage Industrial Catalog
Cart: 0
Home · Asbestos · Crane Company

Crane Company

5 catalogs and ads.

1926 Crane Co.
1926

1926 Crane Co.

1 page

This is a high resolution digital reproduction of an original 1926 ad for Crane Co. The ad features Gas Water Heaters: Premier Insulated Automatic Storage Gas Water Heater "Insulation-The Premier economy is further increased by the fact that when water is once heated it stays hot for many hours. The heavily insulated storage tank allows only a slight radiation loss. A thick jacket of asbestos completely surrounds the storage tank and heating chamber. With its protective outer sheath of steel, this insulation conserves heat like a ginat "Thermos" bottle."; The Keystone Automatic Storage Gas Water Heater "The Keystone is very much like the Premier in appearance and construction. The tank is extra heavy, inclosed in a thick asbestos insulating jacket, with outer sheath of steel."

$30.00
Not ready. Added to your request and not charged.
1932 Crane Co.
1932

1932 Crane Co.

1 page

This is a high resolution digital reproduction of an original 1932 ad for Crane Co. The ad features the Basmor Gas-fired Boiler (For House Heating-Series 25 and Series 40); Basmor Gas-fired Boilers-Type S (For Steam or Vapor House Insulation-Enameled exterior jacket complete, finished in two-tone green enamel, easily assembled and removed without disturbing piping. Heavy air cell asbestos insulation, scientifically designed draft hood.); Basmore Gas-fired Boilers-Type W (For Hot Water House Heating Controls and Accessories) "Housing and Insulation-Enameled exterior jacket complete, finished in two-tone green enamel, easily assembled and removed without disturbing connections. Heavy air cell asbestos insulation, scientifically designed draft hood."

$30.00
Not ready. Added to your request and not charged.
1935 Crane Co.
1935

1935 Crane Co.

1 page

This is a high resolution digital reproduction of an original 1935 ad for Crane Co. The ad features Boilers (Crane Square Coal Boiler; Crane Round Coal Boiler) "Crane Coal Fire Boilers feature a greater ceiling surface exposed to the fire and to the hot flue gases which are forced back and forth until all the available heat is absorbed. Speedier water flow, easy soot cleanout and thick asbestos insulation increase savings in fuel by eliminating heat losses."

$30.00
Not ready. Added to your request and not charged.
1952 Crane Company
1952

1952 Crane Company

29 pages

This is a high quality quality digital reproduction of the cover, title page, and asbestos related pages only (29 pgs) of the Crane Co. catalog published in 1952. In addition to thousands of other products, this catalog contains listings for the following products containing asbestos: Cranite Sheet Packing “Cranite is a superior gasket material prepared from long fiber asbestos, cross-laminated to secure exceptional strength and durability. It has a high and uniform compressive strength, does not deteriorate with age, and is ideally suited for use with water, air, gas, gasoline, ammonia, steam, and other fluids at temperatures up to 750° F.”, 150-Pound Iron Body Lift Check Valves “furnished with a No. 1 Cranite Disc”, Heavy Duty All-Iron Lift Check Valves is furnished with a gasket “made from 1/16-inch thick Cranite sheet packing.”, No. 1 Cranite Composition Discs “…made of a specially formulated composition consisting of a synthetic base, with asbestos and other ingredients.”, No. 4 Cranite Composition Discs “…are laminated, and consist of a synthetic base with spirally wound long fibre asbestos and other ingredients.”, Tongue and Groove Flange Unions “…regularly furnished with a Cranite gasket.”, 300-Pound Steel Locomotive Steam Heat End Valves “The cover, made of cast steel, is held in place by means of Triplex Steel studs and is fitted with a Cranite gasket.”, Ferrosteel Lift Check Valves for Ammonia “The cap joint is tongue and groove, assuring positive retention of the 1/16-inch thick Cranite gasket”, J-M Pre-Shrunk Asbestocel “Johns-Manville Pre-Shrunk Asbestocel is a cellular type of insulation, made of alternate layers of plain and corrugated asbestos felts. Used on pipe lines carrying low pressure steam and hot water. This material will not absorb moisture while in stock or during handling and consequently expand. Pre-Shrunk Asbestocel is made of specially-treated, moisture resistant asbestos paper which prevents “breathing” and thus removes the cause of objectionable shrinkage cracks.”, J-M 85% Magnesia Insulation, J-M Asbestos Sheet Millboard, J-M Asbestocel Blocks, J-M 85% Magnesia Blocks, J-M Asbestos Finishing and Insulating Cements, and Ric-wil Insulated Piping Systems (Hel-Cor Insulated Pipe Units “For underground lines…Outside is coated with asphalt and wrapped with asbestos felt…”, Foilclad Overhead Lines “A wrapping of asbestos felt and a final spiral wrapping of copper or aluminum foil provide added protection.”, Prefabricated Manholes “asbestos bonded”, Utilidor-Type Conduit “Made of Armco corrugated ingot iron, galvanized and asbestos-bonded…”)

$95.00
Not ready. Added to your request and not charged.
1960 Crane Company
1960

1960 Crane Company

13 pages

This is a high quality quality digital reproduction of the cover, title page, and asbestos related pages only (13 pgs) of the Crane Co. catalog published in 1960. In addition to thousands of other products, this catalog contains listings for the following products pertaining to asbestos: Crane Packings for Bronze and Iron Body Valves “Crane bronze and iron body valves in the smaller sizes (usually 2-inch and smaller) use packing made of endless molded rings; larger sizes have plastic cores encased in woven asbestos. The packings are suitable for steam, water, oil, gas, liquefied petroleum gases, gasoline, and air. Although the packings generally are suitable for temperatures up to 550 F, the pressure-temperature ratings specified for the individual valves apply. All rings are accurately die-formed to fit into stuffing boxes with minimum effort. Endless molded rings (illustrated at upper left) are formed from a homogenous mass consisting principally of asbestos filler, graphite, and binder. The fiber length is carefully determined and the percentage of asbestos and graphite accurately apportioned to maintain deformable qualities in each ring. Core packing (see second illustration at left) consists of a plastic core encased in an asbestos jacket. The core material is essentially the same as that used in the molded ring packing; the length of asbestos fiber is carefully determined, and a corrosion inhibitor is added. Jackets are generally comprised of a commercial grade yarn or braid. After the braid is applied to the core, the packing is drawn through a light binder and graphite to provide adequate external lubrication. The rings are the split-type so that they are easily slipped on the stem. The diagonally cut ends provide a bevel joint for good sealing when the gland is pulled up.”, Crane Packing for Steel Valves “Steel valves intended for high pressure-temperature service demand the utmost in well-constructed packing. In Crane valves, the core materials are asbestos and graphite with a minimum of binder which will not harden in service. The cores are soft enough so that the packing, under fluid and gland pressure, will conform to the shape of the stuffing box with no detrimental effect. Suitable agents are included to inhibit stem corrosion.”, Cranite Sheet Packing “Cranite is a superior gasket material prepared from selected long fiber asbestos, cross-laminated to secure exceptional strength and durability. It has a high and uniform compressive strength, does not deteriorate with age, and is ideally suited for use with water, air, gas, gasoline, ammonia, steam, oil, acids, alkalies, etc. it is used for temperatures up to 750 F.”, Spiral Wound Gaskets “Spiral wound gaskets consist of plies of preformed metal with asbestos or some other material as the filler strip. Corrugations in the continuous metal strip impart tension and resiliency when the gasket is under compression; the edges of the strip create multiple barriers against leakage; the soft filler strip seals minute imperfections in the flange faces. The gaskets are self-adjusting to compensate for shock, vibration, and temperature change. They are recommended for use against steam, oil, gases, and liquids including most chemicals, in high pressure, high temperature installations.”, 125-Pound Bronze Gate Valves (Wedge Disc-Non-Rising Stem-Bolted Bonnet) “The bolted bonnet is unusually compact. Equipped with steel studs, bronze nuts, and a Cranite gasket, it maintains a strong, tight joint, yet can easily be dismantled and reassembled with no damage to the valve.”, 300-Pound Bronze Gate Valves (Rising Stem-Wedge Disc-Monel Seats) “The 1-inch valves have a union bonnet; larger sizes have an inside screw, bolted bonnet with steel studs, bronze nuts, and Cranite gasket.”, 200-Pound Bronze Globe and Angle Valves “The No. 229 C is especially suitable where discs must be renewed quickly and easily. The valve is regularly furnished with a No. 4 Cranite Disc for steam up to 450 F (and for hot water from 200 to 420 F).”, No. 1 Cranite Discs “No. 1 Cranite Discs are made of a specially formulated composition consisting of a synthetic base, with asbestos and other ingredients. Sizes 3-inch and smaller have a plain finish on both sides and, on one side, bear the marking “No. 1 Cranite” and the size; larger sizes are plain on both sides and bear no marking.”, No. 4 Cranite Discs “No. 4 Cranite Discs are laminated and consist of a synthetic base with spirally wound long fibre asbestos and other ingredients. They are suitably cured to provide the hardness needed for high temperature, yet they seat with minimum effort. All sizes have serrated faces on both sides and, on one side only, bear the marking “No. 4 Cranite” and the size.”, Cranite and Lead Gaskets (For Tongue and Groove Joints) “The Cranite (illustrated) and lead gaskets listed in the table at the right are used with the forged steel tongue and groove flange unions described above.”, Cranite Sheet Packing “Cranite Sheet Packing is made from an asbestos composition. The selected long fiber asbestos, cross laminated to provide unusual tensile strength, offers very uniform and high resistance to compression, is exceptionally strong and rugged, and will not deteriorate with age.”, Gaskets for Bronze, Aluminum, and Corrosion-Resistant Flanged Joints “These full face gaskets are 1/16-inch thick and are regularly made of Cloth Inserted Rubber, “CC” Rubber, and Cranite for 150-pound joints or of “CC” Rubber and Cranite for 300-pound joints.”, Gaskets for Large Tongue and Groove Flanged Joints “Cranite gaskets are available for 300, 400, 600, 900, and 1500-pound steel large tongue and groove flanged joints; the gaskets are 1/16-inch thick.”, Gaskets for Cast Iron Flanged Joints “When Cranite gaskets are installed, they should be coated with Crane Thread Lubricant to facilitate making tight joints.”, and Gaskets for Steel Flanged Joints “Cranite gaskets are recommended for steam, water, air, gas, and many other similar services, including oil lines on which asbestos gaskets are permitted.”

$95.00
Not ready. Added to your request and not charged.