RRETROPAPERDigital Archive of Vintage Industrial Catalog
Cart: 0
Home · Asbestos · Mundet Cork Corporation

Mundet Cork Corporation

5 catalogs and ads.

1947 Mundet Cork Corporation
1947

1947 Mundet Cork Corporation

12 pages

This is a high resolution digital reproduction of an original 1947 catalog for the Mundet Cork Corporation. The catalog features the use of Mundet Cork for Cold Storage Insulation, Cold Pipe Covering and Lagging, Roof Insulation, and Vibration Isolation. Asbestos is recommended as an ingredient in the preparation of different:jackets or pipe coverings (Painted Canvas Jacket “Used for a decorative finish…asbestos cement troweled on fittings thick enough to give smooth base for canvas.”; Plaster Jacket “Used for neat appearance and possibility of rough usage…Two coats Portland and asbestos cement plaster. First, rough or scratch coat; second, troweled smooth and even.”)

$60.00
Not ready. Added to your request and not charged.
1952 Mundet Cork Corporation (Item # 1333)
1952

1952 Mundet Cork Corporation (Item # 1333)

12 pages

This is a high resolution digital reproduction of an original 1952 catalog for the Mundet Cork Corporation. The catalog features Mundet 85% Magnesia Pipe and Block Insulation. It describes the manufacturing process. Step 1: "Magnesium carbonate (magnesia) and asbestos fibres, from which most of the water has been removed in filtering, moves by a screw conveyor into large revolving mixers (not shown). In the mixers a measured amount of water, which determines the final density of the insulation is added and the machines rotated to produce a thoroughly homogeneous mixture. This mixture of magnesia and asbestos fibres is weighed out by an overhead traveling scale into a battery of extruding machines. Reciprocating metal rods, called agitating fingers (shown at top of illustration), vibrate through the mold in order to dislodge any air bubbles and to assure longitudinal alignment of the asbestos fibres. The removal of a section of pipe covering from the mold is shown in top illustration." The physical attributes described include ductile strength "Through the use of long asbestos fibres running longitudinally, greater strength is built into Mundet "Custom-Molded" 85% Magnesia." The catalog includes significant technical data

Not ready. Added to your request and not charged.
1952 Mundet Cork Corporation (ID # 1332)
1952

1952 Mundet Cork Corporation (ID # 1332)

12 pages

This is a high resolution digital reproduction of an original 1952 catalog for the Mundet Cork Corporation. The catalog features the use of Mundet Cork for Cold Storage Insulation, Cold Pipe Covering and Lagging, Roof Insulation, and Vibration Isolation. 1/2" Asbestos Cement Plaster Finish is recommended as a finish for Bevelled Cork Lagging "Bevelled Cork Lagging may also be finished with a 1/2" Asbestos Cement Plaster Finish. Before applying this finish, the lagged insulation galvanized iron wire mesh poultry netting securely wire-laced in place. The finish shall then be applied in two coats of approximate equal thickness. The first coat shall be applied over the wire mesh and scratched and shall be thoroughly dry before the second coat is applied. The second coat shall receive a smooth trowel finish. Metal corner beads should be used on all external edges of the insulation. The mortar for both coats should be mixed in the proportion of 100 lbs. of Portland Cement to 200 lbs. of Asbestos Cement."

$60.00
Not ready. Added to your request and not charged.
1957 Mundet Cork Corporation Thermal Insulations
1957

1957 Mundet Cork Corporation Thermal Insulations

4 pages
$50.00
Not ready. Added to your request and not charged.
1961 Mundet Cork Corporation Thermal Insulations
1961

1961 Mundet Cork Corporation Thermal Insulations

4 pages
$50.00
Not ready. Added to your request and not charged.