RRETROPAPERDigital Archive of Vintage Industrial Catalog
Cart: 0
Home · Asbestos · Phoenix Specialty Manufacturing Co., Inc.

Phoenix Specialty Manufacturing Co., Inc.

3 catalogs and ads.

1948 Phoenix Specialty Manufacturing Co., Inc.
1948

1948 Phoenix Specialty Manufacturing Co., Inc.

8 pages

This is a high resolution digital reproduction of an original 1948 catalog for Phoenix Specialty Manufacturing Co., Inc. This catalog features many products, including Corrugated Metal-Asbestos Gasket-No. 2 (Pressures to 600 lbs. -Temperatures to 750ºF) “This Phoenix Gasket combines the increased strength of deeply corrugated metal with the positive seal of loose fibre asbestos cord. The asbestos is cemented into the corrugations on both sides of the base. Through this construction, No. 2 Gasket remains unusually flexible; its efficiency is unaffected by expansion or contraction. It assures permanently sealed joints and a resiliency that readily compensates for rough or uneven flanges, or poor alignment of piping. It is widely used on high pressure lines and on super-heated steam lines and is guaranteed to outlast four or five plain asbestos gaskets.”; Single Jacket Asbestos Gasket-No. 3 (Pressures to 600 lbs.-Temperatures to 750ºF) “Consists of an asbestos core, is partially enclosed by a copper jacket, which seals one face and both edges of the core and slightly overlaps the other face. The asbestos is thereby reinforced and makes this compact construction blow-out proof and suitable for higher pressures, yet sufficiently soft to “make-up” easily.”;Double Jacket Asbestos Gasket-No. 4 (Pressures to 750 lbs.-Temperatures to 1000ºF “This highly efficient Phoenix Gasket has the additional strength thanks to a double jacket that completely encloses the asbestos core. One jacket fully covers one face. The outer jacket covers the opposite face and extends sufficiently around the edges to overlap the inner jacket and seal it in place. Consequently No. 4 Gasket is recommended for sealing joints subject to higher pressures and temperatures under difficult conditions such as for high pressure stills, heat exchangers, condensers.”; Metal-Asbestos Gaskets-Double Armored Asbestos Gasket-No. 5 “In Phoenix No. 5, the double jacket construction (of No. 4) is given additional strength and protection by two jackets, completely sealing the asbestos core, extended around the inner and outer edges to form double armor. The asbestos core serves solely as a cushion compressing sufficiently to give full sealing-without undue strain on the flanges or bolts. It is used where high internal pressures and unusually severe operating conditions are encountered.”; Corrugated Jacket Asbestos Gasket-No. 1100 (Pressures to 1200 lbs.-Temperatures to 1000ºF) “Through its reinforced construction it withstands exceptionally high pressures and temperatures. Its asbestos core is completely protected by a heavy, double, deeply corrugated jacket, to give the greatest resiliency possible. The corrugations also serve as individual concentric gaskets and compensate for flange irregularities and piping misalignment. The asbestos core compresses sufficiently to insure complete joint sealing without undue flange or bolt strain. Consequently, No. 1100 is extensively used for sealing joints in chemical, refining and other processes operating under extreme conditions. It, likewise, finds wide application in power plants using superheated steam.”; Asbestos Fiber Sheet Gaskets “Consists of long-fibered asbestos compressed with enough rubber binder to hold and waterproof each fiber without loss of heat resistance. Keeps well without hardening or losing its flexibility or tensile strength. Resistant to gas, oil, hot or cold water, ammonia, alkalis and some acids. Asbestos Gaskets “Long or short fibered asbestos compressed with an inorganic binder to give hard, medium and soft grades. Resistant to most acid solutions, milk alkalis, petroleum and its derivatives, alcohol, glycerine, etc. Low in cost and fireproof.”; Other Compositions include Goodyearite; Special Shaped Gaskets-Phoenix manufactured gaskets with single or double jackets for Heine and Babcock & Wilcox boilers

$65.00
Not ready. Added to your request and not charged.
Phoenix Specialty Mfg. Co., Inc. Asbestos Gaskets
1951

Phoenix Specialty Mfg. Co., Inc. Asbestos Gaskets

4 pages
$55.00
Not ready. Added to your request and not charged.
Phoenix Specialty Mfg. Co., Inc. Asbestos Gaskets
1958

Phoenix Specialty Mfg. Co., Inc. Asbestos Gaskets

1 page
$45.00
Not ready. Added to your request and not charged.